Important Mk3® Compatibility Notice
Compatibility &
Safety Notice
Important installation and compatibility information for CSpring automatic water replenishment systems.
Mk2®, Mk3® & MINI® Users
Using the CS SilverLiner® with a CSpring Mk2®, Mk3®, or MINI® may increase the risk of sensor errors or water chamber overfilling.
Proper sensor placement and installation are essential before using these products together.
Required Water Chamber Configuration
The updated water chamber top lid that allows both S1 and S2 sensors to be installed on the front of the water chamber must be used.
Do not use the CS SilverLiner® if either sensor is installed on the side of the water chamber.
Essential Installation Requirements
To reduce the risk of sensor errors and overfilling, the CS SilverLiner® must be installed exactly as directed.
Ensure the SilverLiner and the inside of the water chamber are completely dry before installation.
Position the liner completely flush against the inside front wall of the water chamber.
Verify that no gaps, folds, wrinkles, or trapped moisture remain between the liner and chamber wall.
Test both sensors and verify proper system functionality according to CSpring's instructions before relying on the system for regular use. Continue to inspect and monitor the installation periodically.
Customer Acknowledgment & Responsibility
By purchasing the CS SilverLiner® with the intent to use it with the CSpring Mk2®, Mk3®, or MINI®, the customer acknowledges and accepts the associated risks and assumes responsibility for proper installation, monitoring, maintenance, and use.
Limitation of Liability
To the fullest extent permitted by applicable law, CSpring LLC is not responsible for spills, overfilling, water damage, sensor errors, or related issues resulting from improper installation or use of the CS SilverLiner® with these devices.
Nothing in this notice limits consumer rights or remedies that cannot legally be excluded.
Before Regular Use
Confirm the correct top lid is installed, both sensors are positioned on the front of the chamber, the SilverLiner is completely dry and properly seated, and all sensor functionality tests have been completed successfully. Do not use the combined system if any of these requirements are not met.
Need Installation Assistance?
Review our installation instructions and troubleshooting resources before using your SilverLiner with a CSpring automatic replenishment system.
View Installation & Support GuidesQuestions about compatibility? Contact CSpring Support